HAMforum.ru

GenaRostov, к 35-му и в прошивке должно быть #define BAT_INFO 35

IU4ALH, There is no technical possibility to test the firmware using a 480x320 screen yet. Therefore, the adaptation will be in the next version after 4.1

hi，Bernard Binns，my touch screen is reversed , what should i do? 73!

RX1900, what do the following lines look like in your sketch?..
#define SCREEN_V 0
#define SCREEN_H 1
uint16_t calDataV[5] = { 258, 3566, 413, 3512, 4 };
uint16_t calDataH[5] = { 387, 3530, 246, 3555, 7 };

hi, binns ,i didn't make any changes .Up,down,left and right are opposite Horizontal mirror !

20220424061514316.png

RX1900, Swap the connection x- x+ According to your scheme, it would be logical

I've tried and nothing has changed

Ok, change in sketch lines:

uint16_t calDataV[5] = { 258, 3566, 413, 3512, 6 };
uint16_t calDataH[5] = { 387, 3530, 246, 3555, 5 };